ETN-120-AFT-75产品概述
When supply voltage is applied to the ETN Flasher, the off-delay begins. Upon completion of the off-delay, the load energizes and the on-delay begins at the rate of 75 flashes per minute with the off-delay always equalling the on-delay. The off/on cycling continues until the supply voltage is removed.
Features:
Totally Solid-State
2-Wire Leads
Totally Encapsulated Circuitry
Molded Case with Built-In Mounting Feature
High Inrush Capability
Low Cost
Specifications:
Timing Mode: Flasher; 50% Duty Cycle
Timing: 75 Flashes/Minute
Supply Voltage: 120 VAC, 50/60 Hz.
Operating Temperature: –20°C to +60°C, Free Air
Mounting: #8 or #10 Screw
Dimensions (H × W × L): 0.905" × 0.99" × 1.83"
Termination: 6" Wires (2), 18 AWG
US and Canadian UL Recognized, CSA Certified
Datasheet
