LI40-1001产品概述
The general purpose indicator displays tank level or volume in engineering units with 1-4 relay status indicators, and is compatible with any 1.25m or 3m range EchoPod level sensor that’s been configured with WebCal 6 software and updated to V50 firmware or higher. Powered by EchoPod, the field mount indicator may be located up to 4.5m (15’) from the sensor. PodView requires no programming. The indicator repeats the measured value, displays relay status and set point configuration of the attached sensor. If EchoPod relay set point changes are desired, they can be easily made through the field indicator.
Features:
Indicates tank level or volume and relay status
Enables EchoPod relay set point changes in the field
Powered directly by the attached EchoPod sensor
Repeats EchoPod sensor data with no programming
Corrosion resistant enclosure with NEMA 4 faceplate
Compatibility:
EchoPod sensors operating on V50 firmware or higher
V50 firmware is available via WebCal 6 software or higher
Maximum distance between PodView & EchoPod is 4.5m (15 ft.)
Datasheet
