关于我们 | 联系我们

库存查询

The perfect choice for those demanding pressure switch applications. Hobbs 5000 Series pressure switches incorporate direct-action blade contacts for reliable, consistent switching. The polyimide film diaphragm is compatible with a wide variety of fluids. Ideal for oil and air pressure applications where automotive-style switches won't hold up. Available in normally-open (NO) normally-closed (NC) and dual-circuit (D.C.) electrical contact settings. Note: Dual circuit switches contain one set of normally-open and one set of normally-closed contacts. The set point is determined by the NC circuit. The deadband between the two sets of contacts can range from 2.5 psi for 4 psi set point switches, to 23 psi for 60 psi set point switches.Switches are designed for use with motor oils, hydraulic and transmission oils, jet fuels and other similar hydrocarbon media. They are not recommended for use with hot water, strong acids or high pH fluids. Suitability of application is the responsibility of the user. Do not install in areas of extreme heat or vibration. Avoid installing near exhaust manifolds, mufflers, open flames or other potential sources of media ignition. Always install by using wrench on hex base.Features:

Contacts: Silver Alloy, Gold-Plated

Temperature Range: –40°F to +250°F (–40°C to +120°C)

Operating Pressure: 150 psi for 4, 10 and 15 psi Set Points (250 psi for 60 psi Set Points)

Burst Pressure: 750 psi for 4, 10 and 15 psi Set Points (1250 psi for 60 psi Set Points)

Proof Pressure: 500 psi

Electrical Ratings: Resistive — 15 A @ 6 VDC, 8 A @ 12 VDC, 4 A @ 24 VDC; Inductive — 1 A @ 120 VAC, 0.5 A @ 240 VAC

Brand/Series	5000 Series
Function	Dual circuit, one adjustable circuit. Note: The NC circuit is the reference circuit for the dual circuit switch; the normally open circuit is not adjusted. Expected deadband between the NC and NO circuits is 15 PSI.
Special Features	Factory reference circuit set to 35 PSI and adjustable circuit may be set between 25 to 50 PSI plus or minus 5 percent.
Supply Voltage	24 VDC
Termination	Screws
关键词

• 参考图片
• 制造商 / 说明 / 型号 / 仓库库存编号
• PDF
• 操作

• 
  
• Honeywell
  Pressure Switch; -40 degF; 250 degF; Screw; 100 psi
  
  型号：76055-00001000-01
  仓库库存编号：70111515
  
• 
  
  
• 搜索

• 
  
• Honeywell
  Boot; Pressure switch accy; Fits Honeywell-Hobbs 5000 series
  
  型号：79380-00
  仓库库存编号：70111558
  
• 
  
• 搜索

• 
  
• Honeywell
  PRESSUR Switch, 15A@6VDC, 8A@12VDC, 4A@24VDC, 1@120VAC, .5A@240VAC, D.C-3T, 4PSI,
  
  型号：76579-00000040-01
  仓库库存编号：70111619
  
• 
  
  
• 搜索

• 
  
• Honeywell
  Pressure Switch, 15 PSI, 15, 8, 4 A (Resistive), 1, 0.5 A (Inductive)
  
  型号：76072-00000150-01
  仓库库存编号：70111625
  
• 
  
  
• 搜索

• 
  
• Honeywell
  Pressure Switch, 60 PSI, 15, 8, 4 A (Resistive), 1, 0.5 A (Inductive)
  
  型号：76074-00000600-01
  仓库库存编号：70111628
  
• 
  
  
• 搜索

• 
  
• Honeywell
  IP67 Snap Action Limit Switch, Plunger, Die Cast Zinc, NO/NC, 300V
  
  型号：91MCE2-P1
  仓库库存编号：70119015
  
• 
  
  
• 搜索

• 
  
• Honeywell
  Top Plunger WITH Boot SEAL Switch, 1NO1NC Direct Opening SNAP ACTION, 1M CABLE
  
  型号：91MCE18-P1
  仓库库存编号：70119021
  
• 
  
  
• 搜索

• 
  
• Eaton / Switches
  Switch, Toggle, 2PDT, On-None-On, .250 Spade Terminals, 20 Amps @ 125VAC
  
  型号：XTD4C1A
  仓库库存编号：70155642
  
• 
  
  
• 搜索

• 
  
• IDEC Corporation
  Switch, Pushbtn; 1NO 1NC; Flush; Blk Grn Red inserts; Mom; 10A 110VAC; 22mm mnt
  
  型号：ABW111-B,G,R
  仓库库存编号：70172523
  
• 
  
  
• 搜索

• 
  
• Honeywell
  PRESSURE SWITCH- PS D/C 5000 BLADE (1 PSI)
  
  型号：78712-00000010-01
  仓库库存编号：70399474
  
• 
  
• 搜索

Brand/Series 5000 Series  Honeywell Brand/Series 5000 Series  Pressure Sensors Brand/Series 5000 Series  Honeywell Pressure Sensors Brand/Series 5000 Series   Function Dual circuit, one adjustable circuit. Note: The NC circuit is the reference circuit for the dual circuit switch; the normally open circuit is not adjusted. Expected deadband between the NC and NO circuits is 15 PSI.  Honeywell Function Dual circuit, one adjustable circuit. Note: The NC circuit is the reference circuit for the dual circuit switch; the normally open circuit is not adjusted. Expected deadband between the NC and NO circuits is 15 PSI.  Pressure Sensors Function Dual circuit, one adjustable circuit. Note: The NC circuit is the reference circuit for the dual circuit switch; the normally open circuit is not adjusted. Expected deadband between the NC and NO circuits is 15 PSI.  Honeywell Pressure Sensors Function Dual circuit, one adjustable circuit. Note: The NC circuit is the reference circuit for the dual circuit switch; the normally open circuit is not adjusted. Expected deadband between the NC and NO circuits is 15 PSI.   Special Features Factory reference circuit set to 35 PSI and adjustable circuit may be set between 25 to 50 PSI plus or minus 5 percent.  Honeywell Special Features Factory reference circuit set to 35 PSI and adjustable circuit may be set between 25 to 50 PSI plus or minus 5 percent.  Pressure Sensors Special Features Factory reference circuit set to 35 PSI and adjustable circuit may be set between 25 to 50 PSI plus or minus 5 percent.  Honeywell Pressure Sensors Special Features Factory reference circuit set to 35 PSI and adjustable circuit may be set between 25 to 50 PSI plus or minus 5 percent.   Supply Voltage 24 VDC  Honeywell Supply Voltage 24 VDC  Pressure Sensors Supply Voltage 24 VDC  Honeywell Pressure Sensors Supply Voltage 24 VDC   Termination Screws  Honeywell Termination Screws  Pressure Sensors Termination Screws  Honeywell Pressure Sensors Termination Screws