BS2RAC产品概述
PA4600 SYSTEMS PENDING .(Requires dimensional information and may be space prohibitive)) Solid State Outputs Note: Two "force guided" or "captive contact" style relays are recommended for safety hazard loads.
The Sti® BeamSafe II is a long range single-beam safety control designed for perimeter and access guarding. "Diverse redundant" microprocessor design provides safe, control-reliable operation. A BeamSafe II system consists of one transmitter and one receiver. No interconnecting cables or separate control enclosure are required. Mounted on the receiver, four separate visible indicators provide instant information on system clear, blocked or interlocked status as well as signal strength. Additional diagnostic indicators on the receiver provide codes to assist with troubleshooting. Output options include redundant solidstate or force guided relays located in the receiver. Immunity to weld flash and ambient light are enhanced by coding the infrared beam. This feature also eliminates interference from other BeamSafe II units installed in close proximity. A tight beam angle reduces problems associated with reflective surfaces. The Beamsafe II's built-in lens heater is effective in environments where condensation may form on the transmitter or receiver lens.
60 m (200 ft.) Range
Four Possible Transmit Codes Eliminate Crosstalk from Multiple Units in the Same Area
Signal Strength Indicator and Integral Gun Sight Allow Easy Installation
No Interconnecting Cables Required, Which Speeds Long-Range Installations
Adjustable Mounting Brackets Allow Easy Alignment
Datasheet
