DXC100A产品概述
Teledyne LeCroy Passive Differential Probe Pair DXC100A
The DXC100A is a high-performance, passive, matched, differential probe pair designed for use with the DA1800 series of differential amplifiers. The probe pair consists of two highly matched individual probes that share a common compensation box to allow the attenuation factor on both probes to be simultaneously switched between 10x and 100x. When used with the DA1855A differential amplifier ( 801-4852 , 801-4861 ), the probe's attenuation factor is automatically incorporated into the effective gain display, and the location of the decimal into the voltage generator display. Although primarily designed for use with the amplifiers, the DXC100A differential probe pair can be used with any oscilloscope or plug-in unit with an input impedance of 1MO/15-26pF and one inch (25.4 mm) spacing between connectors. When used on a differential amplifier, the DXC100A compensation box allows for precise adjustment and matching of the transient response and optimization of the system Common Mode Rejection Ratio (CMRR).
Features
DC to 100MHz bandwidth with DA1855A
Maximum input voltage 500V
Selectable 10 or 100 attenuation factor
1.2m cable length
Passive Oscilloscope Probes
Note
All the products in this range are supplied for use with instruments with a permanent earth connection.
Datasheet
