关于我们 | 联系我们

库存查询

The reliable, repeatable, accurate way to check bearings and overall vibration.
Make go or no-go maintenance decisions with confidence. The Fluke 805 FC Vibration Meter is the most reliable vibration screening device available for frontline mechanical troubleshooting teams that need repeatable, severity-scaled readings of overall vibration and bearing condition.

Features:

Innovative sensor design minimizes measurement variations caused by device angle or contact pressure

Consistent data quality at both low and high frequency ranges

Four-level severity scale assesses urgency of problems for overall vibration and bearing condition

Exportable data via USB

Trending in Microsoft? Excel using pre-built templates

Overall vibration measurement (10 Hz to 1,000 Hz) for acceleration, velocity and displacement units of measurement for a wide variety of machines

Crest Factor+ technology provides reliable bearing assessment using direct sensor tip measurements between 4,000 Hz and 20,000 Hz

Compare vibration levels with ISO-10816 severity scales and store results to the Fluke Connect Cloud

Get authorization to take next steps in an instant if machine health is at risk via Fluke Connect? Share-Live? video call*

Colored lighting system (green, red) and on-screen comments indicate how much pressure needs to be applied to take measurements

Temperature measurement with Spot IR Sensor increases diagnostic capabilities

On-board memory holds and saves up to 3,500 measurements

External accelerometer support for hard to reach locations

Flashlight for viewing measurement locations in dark areas

Large screen with high resolution for easy navigation and viewing

Acceleration	g, m/sec²
Accuracy	±2 °C (4 °F) °F
Brand/Series	805 Series
Configuration	Handheld
Current, Input Bias	Maximum 5 mA
Frequency Range	10 Hz to 1,000 Hz
Interface	USB 2.0
Length, Focal	Fixed 1.5 in.
Memory	Up to 3,500 measurements
Resolution	0.01 g
Sensitivity	100 mV g ± 10%
Standards	EN 61000-4-2, EN 61000-4-3, CISPR 11, Class A
Temperature, Operating	-4 to 122 °F
Voltage, Input	20 VDC to 22 VDC
关键词

• 参考图片
• 制造商 / 说明 / 型号 / 仓库库存编号
• PDF
• 操作

• 
  
• Fluke
  Tester; Stroboscope; High Intensity 7-LED; 2.25 x 2.4 x 7.5; 2, 000m Altitude
  
  型号：FLUKE-820-2
  仓库库存编号：70419241
  
• 
  
  
• 搜索

Acceleration g, m/sec²  Fluke Acceleration g, m/sec²  Meters Acceleration g, m/sec²  Fluke Meters Acceleration g, m/sec²   Accuracy ±2 °C (4 °F) °F  Fluke Accuracy ±2 °C (4 °F) °F  Meters Accuracy ±2 °C (4 °F) °F  Fluke Meters Accuracy ±2 °C (4 °F) °F   Brand/Series 805 Series  Fluke Brand/Series 805 Series  Meters Brand/Series 805 Series  Fluke Meters Brand/Series 805 Series   Configuration Handheld  Fluke Configuration Handheld  Meters Configuration Handheld  Fluke Meters Configuration Handheld   Current, Input Bias Maximum 5 mA  Fluke Current, Input Bias Maximum 5 mA  Meters Current, Input Bias Maximum 5 mA  Fluke Meters Current, Input Bias Maximum 5 mA   Frequency Range 10 Hz to 1,000 Hz  Fluke Frequency Range 10 Hz to 1,000 Hz  Meters Frequency Range 10 Hz to 1,000 Hz  Fluke Meters Frequency Range 10 Hz to 1,000 Hz   Interface USB 2.0  Fluke Interface USB 2.0  Meters Interface USB 2.0  Fluke Meters Interface USB 2.0   Length, Focal Fixed 1.5 in.  Fluke Length, Focal Fixed 1.5 in.  Meters Length, Focal Fixed 1.5 in.  Fluke Meters Length, Focal Fixed 1.5 in.   Memory Up to 3,500 measurements  Fluke Memory Up to 3,500 measurements  Meters Memory Up to 3,500 measurements  Fluke Meters Memory Up to 3,500 measurements   Resolution 0.01 g  Fluke Resolution 0.01 g  Meters Resolution 0.01 g  Fluke Meters Resolution 0.01 g   Sensitivity 100 mV g ± 10%  Fluke Sensitivity 100 mV g ± 10%  Meters Sensitivity 100 mV g ± 10%  Fluke Meters Sensitivity 100 mV g ± 10%   Standards EN 61000-4-2, EN 61000-4-3, CISPR 11, Class A  Fluke Standards EN 61000-4-2, EN 61000-4-3, CISPR 11, Class A  Meters Standards EN 61000-4-2, EN 61000-4-3, CISPR 11, Class A  Fluke Meters Standards EN 61000-4-2, EN 61000-4-3, CISPR 11, Class A   Temperature, Operating -4 to 122 °F  Fluke Temperature, Operating -4 to 122 °F  Meters Temperature, Operating -4 to 122 °F  Fluke Meters Temperature, Operating -4 to 122 °F   Voltage, Input 20 VDC to 22 VDC  Fluke Voltage, Input 20 VDC to 22 VDC  Meters Voltage, Input 20 VDC to 22 VDC  Fluke Meters Voltage, Input 20 VDC to 22 VDC